Changing Temperature Display; Oven Lock; Changing Between Continuous Bake Setting Or 12-Hour Feature; Setting Timer - Kenmore 790.9417 Series Use & Care Manual

Oven Controls
Changing Temperature Display (°F or °C)
The electronic oven control is set to display °F (Fahrenheit) when
shipped from the factory. The display may be changed to show
either Fahrenheit or °C (Celsius) oven temperatures.
To change temperature display mode from °F to °C or from
°C to °F
1. Press Broil. HI appears in the display.
2. Press and hold Broil until F or C appears in the display.
3. Press either A or V to toggle between F or C mode
choices.
4. Press START to accept change. The display will return to
the time of day.
Important note:
The temperature display mode cannot be changed when the
oven is set for cooking.
Oven Lock
The OVEN LOCK feature allows you to lock the oven portion of
the appliance while the oven is not in use.
To activate OVEN LOCK feature:
1. Be sure the door is completely closed.
2. Press and hold OVEN LOCK for 3 seconds. Loc will
appear in the display. The OVEN LOCK indicator light will
flash while the motor driven door latch begins locking the
oven door. Do not open the door during this time. Allow 15
seconds for the door to completely lock. Once oven door is
locked, the time of day will appear in the display.
To cancel the OVEN LOCK feature
1. Press and hold OVEN LOCK for 3 seconds. The OVEN
LOCK indicator light will flash and the motor driven door
latch will begin to unlock. Do not open the door at this time.
The door will unlock completely in about 15 seconds.
2. The oven control keys will be available and the oven door
can be opened again.
Important notes:
• To avoid possible damage to the oven door latch
mechanism, do not attempt to open of close the oven door
whenever the OVEN LOCK indicator light is flashing.
• If a control key is pressed when the OVEN LOCK is active,
Loc will appear in the display as a reminder that the oven
keys are inactive when the OVEN LOCK feature is active.
Changing between continuous bake setting or 12-Hour
Energy Saving feature
The oven control has a factory-preset 12-Hour Energy Saving
feature that will turn the oven off automatically if the oven is
left on for more than 12 hours. The control may be programmed
to override this feature to continuously bake.
To set continuous bake mode or 12hr Energy Saving:
Press and hold Timer Set/Off until the control beeps once
(about 6 seconds). - - hr will appear in display. The control
is set for continuous bake. Press Clean key to toggle
between continuous bake and 12hr Energy Saving.
To save the selected mode press START. The display will
return to idle.
Setting Timer
The timer may be set from 1 minute up to 11 hours and 59 min-
utes.
To set the timer
1. Press Timer Set/Off.
2. Press and hold A to increase the time. Release A
when the desired time appears in the display.
3. Press START and timer will begin to count down.
4. When the set time has run out, the Timer will sound with 3
beeps and will continue to beep 3 times every 60 seconds
until Timer Set/Off is pressed.
To change time remaining in Timer, press and hold A or
V to increase or decrease any time remaining.
To cancel the Timer before at any time, press Timer Set/Off
once.
Important notes:
• The timer does not start or stop the cooking process. It
serves as an extra timer in the kitchen that will beep when
the set time has run out. The timer may be used alone or
when any other oven function is active.
• The indicator light located above Timer Set/Off will glow
when the timer is active.
• The timer will display hours and minutes until 1 hour
remains. When less than 1 hour remains, the display will
count down in minutes and seconds. Once the timer has less
than 1 minute remaining only seconds will display.
• If the timer is active when oven cooking, the minute timer
will show in the display by default. To view information of
any other active oven function, press the key once for the
active function to view status.
14