Kenmore 790.4784 Series Use & Care Manual page 18

WaR Oven Control Pad Features
Note: The appearance of your oven control may differ sfightiy from the one Hiustrated bebw, However, aH functions
are the same, Also, push buttons or pads may be shaped differently than those appearing in this Use and
Care Guide,
READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become
familiar with the various functions of the oven as described below,
OVEN CLOCK SET COOK TiME UP and DOWN ARROWS PADS Used ADD 1 MINUTE PAD Used to add f HAKE PAD--
INTERIOR PAD Used to PAD Used to along with the function pads to select minute to the Timer Countdown. This Used to select
LIGHT PAD set the time enter the length oven temperature, cook time, start time feature works with the Kitchen Timer the bake
Used to turn of day. of the baking (when programming an automatic start only and does not affect any cook time function.
time), time of day, clean time and or start time functions. (some models)./
oven interior light time. X minute timer. / FEATURE
ON _._S INDICATOR
_j_jl LIGHTS--
Used to set or cancel x m These lights
the minute timer. The _ show which
minute timer does not"_._ _ feature is in
start or stop cooking, use.
Also, TtMER SET/OFF
BROIL PAD--
Pad is used to set the @ @ @ @
Continuous Sake_ _ Used to
tho w .rMt, ct
Feature. ® 0yea \_J _ broil function.
SELECT CLEAN _ ® Preheat
PAD Used to select / _ Dear Lacked _ L_':_ _ WARM &
the Self-Cleaning _ / _ HOLD PAD--
cycle. A 2, 3 or 4 hour _ _ . _ Used to set the
Self-Clean time may _ _ _ Warm & Hold
beselected/some / __ feature.
models). 7-- -- .
OVEN, PREHEAT & DOOR LOCK UGRTS The "Oven" might STOP CLEAR PAD-- Used to clear
DELAY START PAD Used to set the will glow each time the oven is turned on. The "Preheat" might any function previously entered
will glow when the oven is first set to operate, or if the desired except the time of day and minute
desired start time for baking. May be temperature is reset higher than the actual oven temperature, timer. Press STOP CLEAR to stop
used with COOK TIME to program a The "Door Locked" light will flash until the door locks when the cooking. Also the STOP CLEAR
delayed bake cycle or to program a self-clean cycle is in use. It glows constantly after the door locks pad is used to activate oven lockout
delayed clean cycle. (some models), setting. (some models).
*Note: The OVEN indicator fight on the electronic display wiii turn ON and OFF when using the Bake feature and
during preheat, This is normal and indicates that the oven is cycling to maintain the selected baking temperature,
When preheat indicator light turns OFF, your oven is ready,
For a silent control panek
When choosing a function, a beep will be heard each time a pad is pressed, If desired, the control can be programmed
for silent operation,
1, To tell if your oven is set for normal or silent operation press and hold _I_ for 7 seconds, "- - " or "SP" (speaker)
appears in the display,
2, Within 5 seconds, press the A or v pad to switch between normal sound operation and silent operation mode,
The display will show either "- - " or "SP",
3, Wait 5 seconds to return to normal operating mode,
If "SP" appears, the control will operate with normal sounds and beeps, If "- - " appears, the control is in the silent
operation mode,
Temperature Conversion
(Fahrenheit / Celsius)
The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory, The oven can be
programmed for any temperature from 170°F to 550°F (77°C to 288°C),
To change the temperature to °C (Celsius) or from °C to °F (control should not be in a Bake or Ctean mode):
1, Press and hold , for 7 seconds until °F or °C appears in the display,
2, Press the/_, or v pad to change °F to °C or °C to °F,
8, Wait 5 seconds to accept the changes or press _) to accept the
changes,
18