Preset Tare - A&D HW-10KGL Instruction Manual

Preset tare

Tare value is set and the net is displayed.
The set value is a 5 digit numerical value with a polarity sign and does not contain a
decimal point.
Template
Command
Reply
Upper limit value
The upper limit value is stored. The set value is a 5 digit numerical value with a
polarity sign and does not contain a decimal point.
Template
Command
Reply
Caution The upper limit value must be greater than the lower limit value.
Lower limit value
The lower limit value is stored. The set value is a 5 digit numerical value with a polarity
sign and does not contain a decimal point.
Template
Command
Reply
Caution The lower limit value must be less than the upper limit value.
Accumulation data output
Accumulated data is output.
Template
Command
Reply
Accumulation count output
Number of accumulations is output.
Template
Command
Reply
Reset of Accumulation data and Accumulation count
Accumulated data and number of accumulations are set to zero.
Template
Command
Reply
HV-G/HW-G Series
PT, [parameter]
Net is displayed and the net mark is displayed.
HI, [parameter]
The upper limit value is stored.
LO, [parameter]
The lower limit value is stored.
A
N
CA
Data and number of accumulations become zero.
Page 61
16. RS-232C Serial Interface