Bosscom Bi1 User Manual page 5

Programme stepping, up/ down manoeuvring in menus.
Most set top boxes and TV's has 4 arrow buttons for manoeuvring in or screen menus,
up, down, left and right. In addition they are equipped with separate programme step-
ping buttons for zapping through the programme list. Often these keys are named P+, P
-, CH+ or CH -.
BOSSCOM often makes use of the
ping. This way the four up, down, left and right buttons are free to be used for the more
natural use of manoeuvring in on screen menus.
Using a Beo4 Navi in mode 2, manoeuvring in On-screen menus is fully handled using
the added 'joy -stick', not available on previous Beo4 models. In a Beo4 Navi setup we
therefore can make use of the up and down arrows for programme zapping.
Setting the Zap Mode Option
If the BOSSCOM controller is not set to operate in Navi mode, the Beo4 but-
tons and
are used to manoeuvre up and down in an on -screen menu. This is the default factory
setting, as described above.
Selecting the Zap mode buttons:
Enter one of these 2 codes within 10 seconds to set the pre ered Programme Zap mode buttons.
and the
are used for programme stepping. The
The
gramme zapping.
The
gramme zapping.
keys for programme zap-
and
and buttons will be used for pro-
buttons will be used for pro-
&
buttons