Bosscom Bi1 User Manual page 4

Operating with BOSSCOM
To be able to operate the non B&O TV optimal using the BOSSCOM
the user has to be familiar with the operations available when using the original remote
control, as described in the TV's user manual.
A beo4 remote control is not equipped with as many keys as most remote controls for
non B&O devices. We have designed an operation 'layout' that works logically, even
for ma
functions.
The Beo4 Navi model introduces new buttons, making it easier to make operation
table's, closer to the TV's own.
Coloured function buttons.
To make room for easy access to more important functions, in some layouts we have
moved the coloured function buttons, to a lower layer. In these layouts to send a 'color'
command, a must be pressed before the coloured button itself.
This way we are able to assign other functions to the coloured buttons in direct mode.
In a BOSSCOM environment the coloured buttons are often assi gned to these opera-
tions:
Go, Navi or Stop shifted operation.
Some of the buttons has two or three operations. To get to these they have to be preced-
ed with or
O
In case of Beo4 Navi a
in 'mode 2'. In mode 2 the BOSSCOM uses the Center button f or shifting, instead of
. R . f e r e o t p g a e
Buttons that has been assigned secondary functions are listed in the operating table on
page 9.
.
BOOSCOM
Guide, EPG or similar.
Back, Backup, Return or similar.
Programme zapping. P+/ P - ,
Channel up/ down or CH+/ CH-.
.
button has been a added to replace the
1 . 0
common layout
ns to other
button, when