Getting Started >> continue to the control table on page 5. >> continue to the control table on page 6.
Page 4
The BOSSCOM Bi1 Converter for the Beo4 Remote Control With a Bang & Olufsen audio master in the room it may be used for handling the TV sound. Speakers connected to an audio master are usually of a much better quality than the speakers in a at panel TV. In a B&O link room setup with BeoLink Active you may also use the active speakers to improve sound from most TVs.
Page 5
Controlling with BOSSCOM Bi1 Coloured Function Keys When in Beo4 Navi mode, the coloured keys are not shifted. Refer to the conversion tables on page 7 and 8. GO, Joystick or STOP Shifted Controls...
Page 6
Control Table for Beo4 with a Key. – or Beo4 Type 1710 in mode Everyday Control Text TV Control Playback Controls press 0.5 sec. Other Controls *1 The up/ down arrow controls may be exchanged with the blue and yellow keys. See page 6. *2 As the direct function of the coloured function keys has been assigned to other functions, these have to be preceded with a to retrieve the actual coloured function.
Page 7
Control Table for Beo4 with a Joystick type 1710 without a Key in mode 1 or 3 Navi Joystick operations: Everyday Control Text TV Control Playback Controls Other Controls Navi keys are used for manoeuvring in on-screen menus. Direct Source Selection...
Programme Stepping, Up/ Down Manoeuvring in Menus Note. With a Beo4 Navi in mode 2, manoeuvring in o n-screen menus is carried out by the ‘joy-stick’, not available on previous Beo4 models. Thus the coloured keys on a Beo4 Navi in ‘mode 2’ have NOT been shifted.
Page 9
Enter one of these 3 option sequences within 10 seconds to set the preferr e d mode. Disables the BOSSCOM converter. Enables the BOSSCOM converter. Enables the BOSSCOM converter in Dual TV mode. In this mode: starts control of a B&O TV.
Page 10
Setting the BOSSCOM Volume Option Enter one of these option sequences Alternative speakers. Volume data format emitted within 10 seconds: from Beo4. is pressed the Beo4 sends a Power On command to the TV. At the same time the Beo4 sends a *1 When command to a Bang &...