Product Assembly - VTech Count & Colors Bouncing Frog User Manual

PRODUCT ASSEMBLY

With the Vtech
first. To ensure your child's safety, adult assembly is required. Product
should only be used under adult supervision.
1. insert the seat support into the bottom
of the seat. you will hear a loud 'click'
sound, which indicates that the seat
support is securely fixed into the seat.
2. insert the other side of seat support
into the recessed slot of the support
base. again, once the seat support
is securely in place, you should hear
a loud 'click.'
3. insert the electronic frog head into
the corresponding slot of the seat.
once the electronic head is securely
in place, you should hear a loud
'click.'
WARNING:
Not to be used by children over 36 months. Insufficient strength.
Regularly check for signs of wear and tear on the snap-in or locking
devices. If damaged do not use until repaired or
AtteNtIoN:
Ne doit pas être utilisé par des enfants de plus de 36 mois pour cause
de résistance insuffisante. Vérifier que les grosses vis vertes sont
fermement serrées avant chaque utilisation.
count & colors Bouncing Frog
®
, safety comes
™
replaced..
5