Product Assembly; Product Features; On/Off/Volume Control Switch - VTech Count & Dive Penguins User Manual

PRODUCT ASSEMBLY

1. Choose a location on the bath tub
wall where the VTech
Penguins
TM
The area should be clean and dry
before suctioning the unit to the wall.
For better suction, we suggest wetting
the suction cups before attaching the
unit to the wall. Once the unit is fastened
to the wall, test the strength of the
suction by pulling gently on the unit. The
suction cups may not stick properly to
some textured tiles.
2. To remove the unit from the wall, pull
on the tabs on the back of the suction
cups. We recommend that the unit be
removed from the wall after each use
as the strength of the suction cups
cannot support prolonged use.

PRODUCT FEATURES

1. ON/OFF/VOLUME CONTROL SWITCH

To turn the unit ON, slide the ON/
OFF/VOLUME CONTROL SWITCH
to the LOW VOLUME (
VOLUME (
unit OFF, slide the ON/OFF/VOLUME
CONTROL SWITCH to the OFF (
position.
Count & Dive
®
can be mounted securely.
) or HIGH
) position. To turn the
)