Product Assembly - VTech Bubble Time Turtle Instruction Manual

PRODUCT ASSEMBLY

With the VTech
To ensure your child's safety, adult assembly is required.
1. Open the bottle and carefully tear
off the aluminium foil. Discard the
foil appropriately.
2. Carefully fill the bubble reservoir
with bubble solution. Do not overfill
the bubble solution beyond the
white line shown in the image.
Filling the bottle cap up four times
will fill the reservoir to the top.
Do not dilute the bubble solution.
Using concentrated bubble solution
will produce the best bubbles.
3. Choose a surface on the wall
surrounding the bath where the
suction cup support unit can
be mounted securely. The area
should be clean and dry before
suctioning the unit to the wall.
For better suction, we suggest
wetting the suction cups before
attaching them to the wall. Press the suction cups onto the
wall to secure the suction cup support unit. Once the unit
is attached to the wall, test the strength of the suction by
pulling gently on the unit. The suction cups may not stick
properly to textured tiles. We recommend that the unit be
Bubble Time Turtle, safety comes first.
®
7
7
7