Table of Contents
Advertisement
CARE & CLEANING
Part
Interior & Door
Liners
Door Gaskets
Drawers & Bins
Glass Shelves
Toe Grille
Exterior &
Handles
Exterior &
Handles
(Stainless Steel
Models Only)
Replacing Light
Bulbs
24
Care & Cleaning Tips
What To Use
•
Soap and water
•
Baking soda and
water
•
Soap and water
•
Soap and water
•
Soap and water
•
Glass cleaner
•
Mild liquid sprays
•
Soap and water
•
Mild liquid sprays
•
Vacuum attachment
•
Soap and water
•
Non Abrasive Glass
Cleaner
•
Soap and water
•
Stainless Steel Clean-
ers
•
Unplug refrigerator
•
Wear gloves
•
Remove light cover
•
Replace old bulb
•
Replace light cover
•
Plug in the refrigera-
tor
Tips and Precautions
Use 2 tablespoons of baking soda in 1 quart
of warm water. Be sure to wring excess
water out of sponge or cloth before
cleaning around controls, light bulb or
any electrical part.
Wipe gaskets with a clean soft cloth.
Use a soft cloth to clean drawer runners and
tracks.
Allow glass to warm to room temperature
before immersing in warm water.
Vacuum dust from front of toe grille.
Remove toe grille (see Installation Instruc-
tions). Vacuum backside, wipe with sudsy
cloth or sponge. Rinse and dry.
Do not use commercial household clean-
ers containing ammonia, bleach or alcohol
to clean handles. Use a soft cloth to clean
smooth handles. DO NOT use a dry cloth
to clean smooth doors.
Never use CHLORIDE or cleaners with
bleach to clean stainless steel.
Clean stainless steel front and handles with
non-abrasive soapy water and a dishcloth.
Rinse with clean water and a soft cloth. Use
a non-abrasive stainless steel cleaner. These
cleaners can be purchased at most home
improvement or major department stores.
Always follow manufacturer's instructions.
Do not use household cleaners containing
ammonia or bleach.
NOTE: Always clean, wipe and dry with
the grain to prevent scratching. Wash
the rest of the cabinet with warm water and
mild liquid detergent. Rinse well, and wipe
dry with a clean soft cloth.
CAUTION: Wear gloves when replacing
light bulbs to avoid getting cut.
Use same wattage when replacing bulb
Advertisement
Table of Contents
