Asus WL-HDD User Manual page 37

Chapter 3 - Software Configuration
Fragmentation Threshold (256~2346)
Fragmentation is used to divide 802.11 frames into smaller pieces
(fragments) that are sent separately to the destination. The use of
fragmentation can increase the reliability of frame transmissions. This field
allows you to enable fragmentation by setting a specific packet size
threshold. The default value (2346) is recommended.
RTS Threshold (0~2347)
The RTS/CTS (Request to Send/Clear to Send) function is used to minimize
collisions among wireless stations. If you enable RTS/CTS, it will refrain
from sending a data frame until another RTS/CTS handshake in the air is
completed. This field allows you to enable RTS/CTS by setting a specific
packet size threshold. Default value 2347 is recommended.
DTIM Interval (1~255)
DTIM (Delivery Traffic Indication Message) is a kind of wireless message
used to inform clients in Power Saving Mode when to wake up to receive
broadcast and multicast messages. This field indicates the time interval in
multiples of the Beacon Interval that the system broadcasts DTIMs for
clients in Power Saving Mode. The default value (3) is recommended.
Beacon Interval (1~65535)
This field indicates the time interval in milliseconds after which the system
broadcast packet, called beacon, is sent to synchronize the wireless network.
The default value (100 milliseconds) is recommended.
Enable Frame Bursting?
This field allows you to enable frame-bursting mode to improve performance
with wireless clients that also support frame bursting.
ASUS Wireless "WL-HDD" User's Manual 37