Table of Contents
Advertisement
Installation and Operation Guide
Alarm wiring diagram:
5. VIDEO OUT Connector:
The connector provides the unit's composite video signals to a monitor.
6. ETHERNET (PoE):
This is a standard RJ-45 connector for 10/100 Mbps Ethernet networks. PoE (Power over
Ethernet) function: Provides power to the device via the same cable as used for the network
connection.
NOTE: Please refer to the APPENDIX 6 –PoE Installation Method for more details.
7. Plug Inlet:
An AC 24V or a DC 12V inlet that connects to an external power supply.
NOTE: This device's requires AC 24 voltage, which is within the range of the SELV (safety
extra-low voltage and Separated to primary circuit by double or reinforced
insulation).
9
Advertisement
Table of Contents
