Page 2
UL - CUL listed INTRODUCTION Please read and save this manual! Thank you for selecting the Furman SB-1000 or SB-1000E uninterruptible power supply (UPS). This manual is a guide to install and use the UPS. It includes important safety instructions for operation and correct installation of the UPS.
Rear Panel 1 Communication Function Provides RS-232 interface and UPSMON SB-1000 Rear Panel TEL/MODEM Remote Port SB-1000 / SB-1000 E Front Panel Battery Fault Battery in use Bypass UPS2 software to support WINDOWS, DOS, NOVELL operating systems. 2 Phone/Fax Protection Ports...
Page 4
SB-1000 MANUAL SB-1000 E Rear Panel TEL/MODEM Remote Port I N S TA L L AT I ON Inspect the UPS upon receipt. Any damage to the packaging or unit is not covered under warranty. Contact your parcel carrier. 1) Recharge the batteries The UPS may be used immediately upon receipt.
SB-1000 MANUAL O P E R AT IO N 1) Operation check It is recommended that the user perform a simulation test when using the UPS for the first time or when adding an additional piece of equipment. Conduct a simulation-test: first,...
SB-1000 MANUAL ONE YEAR LIMITED WARRANTY Furman Sound, Inc., having its principal place of business at 1997 South McDowell Blvd., Petaluma, CA 94954 (“Manufacturer”) warrants its SB-1000 (the “Product”) as follows: Manufacturer warrants to the original Purchaser of the Product that the Product sold...
Page 7
SB-1000 MANUAL obligation of Manufacturer with respect to the Product. If any part of this Limited Warranty is determined to be void or illegal, the remainder shall remain in full force and effect. S E R V I C E...
SB-1000 MANUAL TR O U B L E SH OOT ING The UPS has a self-protect feature that prevents it from being damaged as a result of overheating. If the temperature is higher than 131°F (55°C), wait for a while and let the UPS become cool.
SB-1000 MANUAL SPECIFICATIONS Input: Capacity: 1000VA / 600W Voltage: +/-25% at line input Frequency: 50 or 60 Hz +/-10% (auto sensing) Output: Voltage (on battery): Simulated sine wave at 110V/115V/120V or 220V/230V/240V +/- 5% Frequency (on battery): 50 or 60 Hz +/- 5%...
Need help?
Do you have a question about the SB-1000 and is the answer not in the manual?
Questions and answers