Samsung SGH-S275 User Manual page 96

2. To create a new connection, press
Options, select Create, and press
key. To edit an existing connection, press Options, select Edit,
and press
3. Enter or edit the following parameters as required. They may or
may not appear depending on the Network Profile that was
selected:
• Set name: enter a profile name.
• Access name: edit the access point name.
• Auth type: select the type of authentication used for this WAP
connection: None, Normal, or Secure.
• User ID: enter the User ID required to connect to the network.
• Password: enter the user password required to connect to
the network.
• Protocol: set the connection protocol used by the WAP
browser: WAP, HTTP, or Other.
• Home URL: enter the URL address of the page to use as
your homepage.
• Proxy Address: This option only appears when the Protocol is
set to HTTP.
• Gateway Address: Enter the Gateway Address. This option
only appears when the Protocol is set to WAP.
• Secure connection: Select On or Off depending on whether
or not you have a secure connection. This option only appears
when the Protocol is set to WAP.
90
(Select) or the
(New) or press
(Select) or the
key.