Samsung SVS-5R User Manual page 28

Block1
Block4
Block7
[HDD#1]
- To configure the SVS-5R to RAID5, you must change the RAID mode by using the
Configuration Tool. When the following window appears on your screen, select RAID5 under
"Select RAID level". Under "Select number of disks", select a number of connected SATA
hard drives and click "Configure".
- When the RAID settings are complete, the following popup window appears. Click "Exit".
Block1
Block2
Block3
Block4
Block5
Block6
Block2
Block5 Parity(4,5,6)
Parity(7,8,9)
[HDD#2] [HDD#3]
SVS-5R
(RAID5)
Block3 Parity(1,2,3)
Block6
Block8 Block9
[HDD#4]