Table of Contents
Advertisement
User's Manual
- To configure the SVS-5R to RAID0, you must change the RAID mode by using the
Configuration Tool. When the following window appears on your screen, select RAID0 under
"Select RAID level". Under "Select number of disks", select a number of connected SATA
hard drives. Click "Configure".
When the RAID settings are complete, the following popup window appears. Click "Exit".
-
- Clicking the "Exit" button resets the SVS-5R and displays the following message on the LCD
at the front panel. To change the RAID mode, click the button on the left.
Change RAID mode
<-Okay?
20
Advertisement
Table of Contents
