Sharp WX-T92 User Manual page 121

Setting the Stand-by Display
You can set the stand-by screen display.
→
"Settings" "Phone Settings" tab
→
Settings" "Standby Display"
1.
Select "Clock/Calendar", "Display icons" or "Show
Operator Name".
Setting the Vivid Mode
→
"Settings" "Phone Settings" tab
→
Settings" "Vivid Mode"
1.
Select the desired mode.
Setting the Greeting Message
You can set the message which is displayed when the
phone is turned on.
→
"Settings" "Phone Settings" tab
→
Settings" "Greeting Message"
1.
Select "Switch On/Off" and then select "On" or
"Off".
Tip
• If you wish to edit the message, select "Edit
Message" in step 1 and enter a message (up to 10
characters).
120 Settings
(M 9-2-4)
→
"Display
(M 9-2-5)
→
"Display
(M 9-2-6)
→
"Display
Setting the External Display
To Select the Backlight Time Out Duration
→
"Settings" "Phone Settings" tab
→
Settings" "External Display"
1.
Select the desired time out.
Select "Off" to shut the backlight off.
To Set the Date & Time
→
"Settings" "Phone Settings" tab
→
Settings" "External Display"
Date&Time"
1.
Select the desired display format for the date and
time.
To Set the Clock Type
→
"Settings" "Phone Settings" tab
→
Settings" "External Display"
1.
Select the desired clock type.
To Set Incoming Indication
Caller number or registered caller name can be
displayed on the external display when receiving an
incoming call.
→
"Settings" "Phone Settings" tab
→
Settings" "External Display"
1.
Select "On" or "Off".
(M 9-2-7)
→
"Display
→
"Duration"
→
"Display
→
"Display
→
"Display
→
"Clock Type"
→
"Display
→
"Caller Display"