Fan Settings - Honeywell UtilityPRO Series Operating Manual

Fan Settings

UtilityPro Getting Started Features
®
70
Inside
FAN
AUTO
SYSTEM WED
6:01
AM
HEAT
SCHED HOLD CLOCK SCREEN
Press FAN
Note: If a fan schedule is programmed,
"Auto" runs the fan schedule.
Set To
70
Following
Schedule
USAGE
Press FAN to select fan operation, then press
DONE.
• ON: Fan is always on.
• Auto: Fan runs only when the heating or
cooling system is ON.
• Circ: Fan runs randomly, about 35% of the
time, not counting any run time with the
heating or cooling system.
You can press FAN to override the fan settings
you've programmed for different time periods.
If you select ON or Circ, the setting you select
remains active until you press FAN again to
select Auto.
9 9 9
UtilityPRO TM Series