Quick Reference To Display - Honeywell RTH2310 Operating Manual

Quick reference to display screen
Current period number
Appears when the thermostat
is following the schedule (see
temporary override on page
14 and permanent override on
page 15)
* flashes when the compressor protection is engaged (see page 3).
Day
Time
Replace batteries
(see page 14)
RTH2310 Programmable Thermostat
Setpoint indicator
Appears when the setpoint
temperature is displayed.
Replace filter
(see page 14)
5
Temperature
The ambient (measured)
temperature is normally
displayed. To view the
setpoint temperature, press
or once. The setpoint
temperature will appear for
5 seconds.
Heating is on
Cooling is on *