Quick Start - Honeywell RTH2310 Operating Manual

Operating Manual
This thermostat is ready to go
Simply perform the three steps below and the thermostat is in operation:
1) Set the clock (see page 7)
2) Select whether to heat or cool (see page 8)
3) Select whether to keep the fan on continuously or only when needed (see page 9)
This thermostat is pre-set with energy-saving program settings (see page 11). If you do not wish to use
these settings, you can:
• Modify the schedule and temperature setpoints (see page 12)
• Temporarily override the temperature setpoint (see page 14)
• Permanently override the temperature setpoint (see page 15)
6