Honeywell Versaguard TG509 User Manual page 8

TG509, TG510, TG511, TG512 VERSAGUARD™ UNIVERSAL THERMOSTAT GUARDS
Mount Thermostat Guard With Wallplate
CAUTION
Disconnect power supply to prevent electrical shock or
equipment damage.
Wall Mounting Front-wired Subbase (Fig. 10)
Place the thermostat subbase (or wallplate) on the
wallplate template and mark the mounting holes.
Locate the mounting holes on the guard wallplate using
the template as a guide.
Drill the required 5/32 in. mounting holes in the guard
wallplate.
NOTE: If the mounting hole pattern on the guard
wallplate does not match the pattern on the
thermostat subbase or wallplate, drill
additional mounting holes in the guard
wallplate.
Fig. 10. Mount guard wallplate and ring base on thermostat with front-wired subbase or wallplate.
68-0104—4
Mount the thermostat subbase (or wallplate) and the
guard wallplate to the wall using the 1-1/4 in. sheet
metal screws provided with the thermostat. The guard
wallplate must be placed between the thermostat
subbase (or wallplate) and the wall. See Fig. 10.
Wire the thermostat subbase (or wallplate). Refer to the
installation instructions provided with the thermostat.
Mount the thermostat on the subbase (or wallplate) and
place the thermostat cover on the thermostat.
Mount the guard ring base over the thermostat,
subbase (wallplate) and guard wallplate.
Attach the ring base using four no. 6 sheet metal
screws or four anchors and screws (provided).
Mount the guard cover by placing the hinged edge of
the guard cover on the ring base and swinging it down
(horizontal mounting) or to the side (vertical mounting)
until the thermostat guard is in place against the ring
base. See Fig. 7.
Lock the thermostat guard by turning the key (provided)
counterclockwise. See Fig. 8. The key can be removed
only in the locked position.
Remove the paper backing and clear protective cover
from the included monogram and place the monogram
in the recessed area on the guard cover. See Fig. 9.
WALL
GUARD WALLPLATE
SUBBASE
6 0
5 0
8 0
7 0
6 0
5 0
A T
H E
8 0
7 0
6 0
5 0
RING BASE
MOUNTING SCREWS (4)
8
THERMOSTAT
O L
C O
8 0
7 0
MOUNTING
HOLES (4)
M657B