American DJ Audio SKILZ XDM-2221 User Instructions

American audio professional preamp mixer user instructions

Advertisement

Quick Links

XDM-2221
"SKILZ"
professional preamp mixer

USER INSTRUCTIONS

djs wanted.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SKILZ XDM-2221 and is the answer not in the manual?

Questions and answers

Summary of Contents for American DJ Audio SKILZ XDM-2221

  • Page 1: User Instructions

    XDM-2221 “SKILZ” professional preamp mixer USER INSTRUCTIONS djs wanted.
  • Page 2 XDM-2221 “SKILZ” The Ultimate DJ Scratch Mixer! Main Features • 2 phono, 2 line, 2 auxiliaries, & 1 microphone input • Hamster Switch for changing cross fader postion • -30dB Rotary Kills for treble, bass & mids • Changeable transformer switch to up/down or left/right •...
  • Page 3 Index • Safety Instructions...p.3 • Operating Determinations...p.4 • Connections...p.4 • Functions (Front Panel)...p.5-6 • Inputs & Outsputs (Rear Panel)...p.6-7 • Replacing the Crossfader...p.7 • Changing the Transformer Switch...p.7 • Technical Specifications...p.7 • Warranty & Service...p.8 Thank you for purchasing this American DJ® product. The XDM-2221 Is ready to be used, there Is no assembly required.
  • Page 4 Operating Determinations When installing this mixer, please make sure that the device is not exposed to extreme heat, moisture or dust! There should not be any cables lying around. Doing so endangers you as well as others. Do not operate the mixer in extremely hot (more than 30ºC / 100ºF) or extremely cold (less than 5ºC / 40ºF) surroundings.
  • Page 5 Functions (Front Panel) (1) POWER SWITCH - Red LED will light when power is ON. (2) MASTER LEVEL - Dual LED's show the level of the left and right master output. (3) GAIN CONTROL - Used to set the level of the input signal for its designated channel. (4) BASS/MID/TREBLE CONTROL - Used to increase or decrease the LOW's, MID’s, and HI’s of the input signal.
  • Page 6 Functions [Front Panel) Cont. (10) TALKOVER BUTTON - Press the talkover button when you want to use the microphone. When the button is pressed, all signals except the microphone level are decreased by l5dB. In the OFF position, all signals return to their original level.
  • Page 7 Inputs and Outputs lRear Panel) Cont. (16) GND (GROUND TERMINALS) - Connect the ground lead of the turntables with this terminal. This helps to reduce humming and popping noises. (17), (18) LINE / PHONO / AUX INPUT JACKS - Input jack for CH-1, and CH-2. Connect turntables equipped with MM pickup cartridge to PHONO inputs.
  • Page 8 Technical Specifications - model XDM-2221 Inputs: Line: 75mV, 3k Ohm • Microphone: 2.5mV, 600 Ohm • Phono: 1.5mV, 47k Ohm Output: Line: 25V, peak to peak • Headphones: 5W @ 47 Ohm • Distortion: <0.03% Signal-To-Noise Ratios: Line: Better than 85dB • Microphone: Better than 78dB • Phono: Better than 80dB Frequency Response: Line: 20Hz - 15KHz, ±...

Table of Contents