Table of Contents
Advertisement
the computer's power off, be sure to press the hot key again to switch to
the internal display).
Please refer to the
keys to change the display setting.
Do not disconnect the external monitor while in Sleep or Hibernation Mode.
Turn off the computer before disconnecting the external monitor.
When displaying desktop at external analog monitor, desktop is sometimes
displayed on the center of the monitor with black bars around desktop (with
small size).
At that time, please read the manual of the monitor and set the display
mode which is supporting at the monitor. Then it will be displayed with
suitable size with correct aspect ratio.
HDMI device
An HDMI display device can be connected to the HDMI out port on the
computer. To connect the HDMI display device, follow the steps as detailed
below:
As the port operation of all HDMI (High-Definition Multimedia Interface)
display devices have not been confirmed, some HDMI display devices may
not function properly.
Connecting the HDMI out port
1.
2.
1. HDMI out port
Please connect or disconnect an HDMI display device to or from the
computer under the following conditions:
User's Manual
The Keyboard
Plug one end of the HDMI cable into the HDMI in port of the HDMI
display device.
Plug the other end of the HDMI cable into the HDMI out port on your
computer.
Figure 3-18 Connecting the HDMI out port
1
The computer is turned on.
section for further details on using hot
2
2. HDMI cable
P870/P875
3-47
Advertisement
Table of Contents
