Coordinates" Method - Subaru Tribeca Owner's Manual

Setting Route
■ "Coordinates" method
You can set destinations or waypoints using their latitudes and longitudes as follows:
First, choose either of the two procedures below to follow the "coordinates" method.
• Press the
• Press the
1
2
40
button or select , select
button and select (coordinates).
Enter the latitude of the desired location.
Use the numeric keys together with the [°] (degrees), ['] (minutes), and ["] (seconds)
keys.
Enter the longitude of the location.
: Use this key to switch over to the north latitude.
: Use this key to switch over to the south latitude.
: Use this key to switch over to the west longitude.
: Use this key to switch over to the east longitude.
: Use this key to delete the character last entered. Select it repeatedly if you
want to delete all the characters entered.
(destination entry), and then select (coordinates).