Mass Storage; Usb Charge; Card Settings - Sharp SX663 User Manual

To Turn the Authentication Request On or Off
You can request the sender or receiver of the data to
authenticate the passcode (exchanging the passcode) before
pairing devices.
→
"Connectivity" "Bluetooth"
→
"Authentication"
1.
Select "On" or "Off".
Note
• No authentication is required for the paired devices.
• Even if you select "Off", you may authenticate the passcode
when the sender requests it.
To See Your Phone Details
→
"Connectivity" "Bluetooth"
→
"My Phone Details"

Mass Storage

(M 12-2)
You can set the phone to connect to a PC via Mass Storage
mode.
→
"Connectivity" "Mass Storage"
1.
Press [Yes].
Note
• Activating Mass Storage mode also activates offline mode.
• Mass Storage is not available when the battery is low, a
Java™ application is paused, Music Player is active, or a
memory card is not inserted in your phone.
138 Connectivity
→
"Bluetooth Settings"
→
"Bluetooth Settings"

USB Charge

(M 12-3)
You can set the phone to charge via USB, connected to a PC.
→
"Connectivity" "USB Charge"
1.
Select "Enable" or "Disable".

Card Settings

(M 12-4)
Formatting Memory Card
→
"Connectivity" "Card Settings"
1.
Enter your handset code.
For details on the handset code, see "Changing the
Handset Code" on page 129.
2.
Press [Yes] to start formatting.
→
"Format Card"