Connectivity; Bluetooth - Sharp SX663 User Manual

Connectivity

(M 12)
By configuring the settings in this menu, you can connect to

Bluetooth

wireless technology enabled phones, as well as PCs
(USB connection is possible using Data Cable accessory).
Bluetooth (M 12-1)
Bluetooth
For using the wireless function, you need to search
Bluetooth
for other wireless technology enabled devices to
establish contact with your phone. Keep your phone within a
distance of 10 metres from the devices before searching.
Using the Bluetooth Wireless Function
To Turn On or Off the Bluetooth Wireless
Function (M 12-1-1)
→
"Connectivity" "Bluetooth"
1.
Select "On" or "Off".
When "On" is selected, the
activated, and " " is displayed.
To Show or Hide Your Phone
→
"Connectivity" "Bluetooth"
1.
Select the desired visibility settings.
"Show My Phone":
"Hide My Phone":
→
"Switch On/Off"
Bluetooth
wireless setting is
(M 12-1-2)
→
"Visibility"
Allows other devices to
recognise your phone.
Hides your phone from other
devices.
To Search for Devices to be Paired
A maximum of 16 devices can be searched for.
→
"Connectivity" "Bluetooth"
1.
Select the desired device for pairing.
2.
Enter the device passcode.
Note
• You can search for devices even when the Bluetooth wireless
function is off. Once pairing is started, the phone turns the
Bluetooth wireless function on automatically.
• You can only select one device for pairing. To change the
paired device, see "To Activate the Paired Device" on
page 136.
• Pairing means authentication has been established between
the two devices.
• In order to pair two devices with Bluetooth wireless
technology, the users should agree on the same passcode
for both devices.
• The passcode is used only once, so there is no need to
remember it. The passcode can be different each time the
devices are connected.
• Devices that do not have a user interface (i.e., headsets and
car kits) have a factory-set passcode. See the user guide for
the device.
(M 12-1-3)
→
"Search for Devices"
Connectivity 135