Renault Clio Handbook page 40

CHILD sAfETY: choosing a child/baby seat mounting
1
The two rings 1 are located between
the seatback and the seat base of the
seat and are identified by a marking.
The third ring 4 or 5 is used to attach
the upper strap on some child seats.
The ISOFIX anchorage points have been exclusively designed for child
seats with the ISOFIX system. Never fit a different type of child seat, seat
belt or other objects to these anchorage points.
Check that nothing is obstructing the anchorage points.
If your vehicle has been involved in a road accident, have the ISOFIX anchorage
points checked and replace your child seat.
1.34
4
Rear seats
The 2 belt should be positioned be-
tween the seatback and the rear parcel
shelf. To do this, remove the rear parcel
shelf (refer to the information on the
"Rear parcel shelf" in Section 3). Attach
the hook to one of the 4 rings, identi-

fied using the symbol. Depending
on the vehicle, unclip cover 3 from the
mobile floor to access the ring.
(2/2)
2
3
front passenger seat
Attach the belt hook 2 to the ring 5.
All seats
Pull the belt 2 so that the back of the
child seat comes into contact with the
back of the vehicle seat.
Check that the seatback
of the forward-facing child
seat is in contact with the
back of the vehicle seat.
In this case, the child seat may not
always rest on the base of the vehi-
cle seat.
5