Renault Clio Handbook page 170

PUNCTURE, EMERGENCY SPARE WHEEL
4
To refit a wheel
Do not refit a wheel with an alloy
wheel rim or a wheel larger than 16"
under the vehicle.
5.4
(3/4)
5
To carry out this operation, the cable
must be unwound.
If the cable has been wound back up on
its own, unwind it again as follows:
– pull the handle to unwind the cable;
– press the button located under
handle 4 to hold the unwound cable,
then guide it down;
– recover the cable from underneath
the vehicle.
You may refit the wheel.
Make sure that no-one has their fingers close to the cable when you
move the handle: risk of injury.
6
7
After changing a wheel, position the
replaced wheel on support 7, with the
valve facing the ground. Clip cable 5
in its housing 6, then push the wheel
under the boot.
Ensure that tab 8 is positioned towards
the rear of the vehicle.
Position yourself behind the vehicle and
pull handle 4 to raise the wheel until it is
anchored under the vehicle.
8