The unit ......................7 Front Display/LED ..................1 Remote control batteries ................7 Version......................1 Advantages of connecting to a Loewe TV set ..........7 Software update ..................1 Use for the intended purpose and ambient conditions .......8 Factory Settings ..................1 Supervision ....................8 Switching video output ................
Switch over to operate Loewe TV Loewe TV: Digital radio; long: Auro radio Switch over to operate Loewe DVD recorder Loewe Blu-ray Player; long: DVD Player/Auro ..(page 13, 30) (page 3) ......Popup menu on inserted disc Audio selection (page 3) ............... Zoom...
Rear View & Display COMPONENT VIDEO VIDEO OUT (Y Pb Pr) Connection of a 5.1 CH AUDIO OUT Connection of a TV with USB socket TV with video Connection of a surround component inputs (Cinch) only for service input sound audio system (Cinch) Mains cable COAXIAL DIGITAL HDMI OUT...
• Do not place any strong artificial light source in front of the unit. This could You can control three units using the remote control: this Player, a Loewe TV set have a detrimental effect on the infrared reception. and a Loewe Recorder or Loewe Audio System.
(Play, Pause, Stop, Search backwards/forwards, Top Menu) of the Player via the Loewe TV set using the remote control. You have to switch on Digital Link Environmental Protection HD on the Player (page 19).
If the Player does not read a disc correctly, it is possible that the reading device in the unit is dirty. Use a commercially available cleaning disc. Always switch off your system (BluTech Vision, TV set and any other components Keep the disc drawer closed so that no dust gets onto the lens from the drawer.
The Basics Playable Discs Regional Code This Player can only play back coded Blu-ray discs for the region "B" or "All". DVDs Only use discs that conform with conventional standards. can only be played back for the region "" or "All". This can be ascertained from the logos applied.
HDMI connection Using the enclosed HDMI cable, connect the socket HDMI OUT of the Player to the HDMI input socket on the TV set (for Loewe TVs, socket HDMI ). Make the settings as described in page 15/16. Component Video Connection...
Initial Set-up Connecting to a Loewe TV System Make the connections as shown here: Loewe Blu-ray Player Loewe Flat-TV HDMI cable SCART cable HDMI cable Loewe DVD-Recorder S-VIDEO OUT 11 -...
Initial Set-up Connecting to a Loewe TV Audio System Loewe Individual Sound-System (Subwoofer) Power OUT Make the connections as shown here: Surr. Bass Intensity To show the OSD display of the Sound Projector, Front use a SCART Cinch cable. Min.
Concealed Set-up With Digital Link HD (CEC), Loewe TV sets pass the signals from the remote control In the text, the arrows correspond to: "5634". via the HDMI connection from the TV set to the Player. Digital Link HD makes sense The OK button on the remote control is shown as OK in the if you want to set up the Player concealed, e.g.
Initial Set-up Menu Language Audio / Video Settings Select a language for menus and dialogues which are shown by the Player. TV Aspect Ratio Call up the menu. WIDE Select this setting if a wide screen TV set with the picture 5634 Select option MENU [ON SCREEN LANGUAGE].
Initial Set-up Component Video Out HDMI Video Out Set the resolution for the analogue video signal at the interface Set the resolution for the digital video signal at the interface COMPONENT VIDEO OUT. HDMI OUT. 56 In the menu SETTINGS, select the option AUDIO VIDEO 56 In the menu SETTINGS, select the option AUDIO VIDEO SETTINGS.
Initial Set-up HDMI Auto Detection 56 Select option according to the audio playback options on the connected TV set or amplifier. With this setting the Player automatically switches to the HDMI Out if an HDMI Output signal is detected. 56 In the menu SETTINGS select the option AUDIO VIDEO HDMI Out Audio out via the interface HDMI OUT.
Initial Set-up Dynamic Range Control Speaker settings With this setting you can limit the dynamics (this means the You can connect a surround sound amplifier to the Player. In the speaker settings, difference between the loudest and the quietest sounds). You can you can set the necessary parameters to do so.
Initial Set-up Quick start MENU [SPEAKER SETTINGS] SET THE SPEAKER SIZE, DISTANCE FROM LISTENING POINT, AND THE SOUND If quick start is enabled, the start-up time from standby mode will be shortened. LEVEL TO EACH SPEAKERS. 3.8m/0dB However the voltage consumption in standby increases slightly (page 8). 3.8m/0dB 3.8m/0dB 56 In the menu SETTINGS select the option QUICK...
If you have not entered a PIN code yet: 34 Select option YES. With Digital Link HD (CEC), Loewe TV sets pass the signals from the remote control Confirm OK. to the Player via the HDMI connection. Digital Link HD is worthwhile if you want to set the Player up concealed, e.g.
Initial Set-up Parental control The option PARENTAL CONTROL LEVEL FOR BLU-RAY DISC: This function prevents discs that have an adult rating from being played, providing is selected. the discs have a corresponding code. 34 Set option. ➠ A four-digit PIN code is set up (page 19). OFF The disc is played completely.
Initial Set-up Version Angle Mark Display A symbol for the availability of different camera angles (the angle mark) can be The current software version can be displayed in the menu Settings. displayed. 56 In the menu SETTINGS select the option PLAYBACK Software update SETTING.
Video Operation Playing a BluRay disc or DVD General Functions Preparation Selecting a Title Switch the TV set on and set the video source that the Player has been connected TOP MENU/ASSIST Select top menu / title menu. to as the input. DVD+RW Open disc drawer.
Video Operation Function Menu Disc Menu Some discs contain menus to set the language for the film soundtrack, for example, During playback you can change different settings for the inserted disc and also or for subtitles, or to select certain scenes. Accompanying film material may also display status information as in the "Info Menu".
Video Operation Time (playback from ...) Digital Sound Formats, Film Language and Audio The function "Time" allows you to select any time for playback of a title. Channels You can select the digital sound format and the film language. FUNC (EPG) Select function menu. FUNC (EPG) Select function menu.
Audio Operation Audio Playback Info Menu The Player can be used to play Audio CDs. Audio recordings (only CD-DA format) During playback different status information can be displayed on the screen. can also be played back from CD-ROM, CD-R or CD-RW discs. Select Info menu.
Audio Operation Selecting a title Repeat FUNC (EPG) Select function menu. FUNC (EPG) Select function menu. TV-EINSTELLUNGEN 5 6 Select symbol (Title). 5 6 Select symbol (Repeat). Confirm OK. Confirm OK. 5 6 Select title or 5 6 Select ON/OFF. Enter title number.
Troubleshooting Problem Possible Cause Remedy Not working at all Mains cable not plugged in. Firmly plug the mains cable into the Player and into a socket. No picture. TV not switched to receiving signals from the Player. Select the suitable video input mode on the television so that the picture from the Player is shown on the television screen.
Technical Specifications Masthead General BluTech Vision Item.No. 67501D/T00 Loewe Opta GmbH is a company incorporated under German law with its Head Power supply AC 0-40V, 50 Hz Office in Kronach. Power consumption during Operation: 8 W Standby: < 1 W Industriestrasse 11, 96317 Kronach Dimensions (approx.)
Operation of Additional Units Setting the remote control Operating Loewe Equipment Various Loewe units can be set to be used with the remote control Assist as Using the remote control for a BD/DVD Player follows: Press DVD button; the display above it lights up for approx.
Remote Control Assist – TV Operation Switch on/off on standby Sound on / off LED indicator for current operating mode TV Radio Digital; long: Radio Auro Switch over to operate TV Switch over to operate Auro/DVD Player Switch over to operate recorder Sound menu Timer list Picture format...
NTSC: American colour standard. optimal for sports transmissions, however if you are watching a more sedate film, it can distort the image quality. The new Loewe TV sets automatically playback 4p films in the original 4p format. PAL: European colour standard.
Index Advantages of connecting to Factory Settings 1 PIN code 19 a Loewe TV set 7 Factory settings 7 Playable Discs 9 Audio / Video Settings 14 Front Display/ LED 1 Playback ,8 AUDIO OUT 5,16 Front flap 4 Search ...
Need help?
Do you have a question about the BluTech Vision and is the answer not in the manual?
Questions and answers