Getting Started Preparation Other Functions TV operation Call up the menu BluTechVision operation press briefly Close menu Switch device on/off Title menu Insert disc Button on device – Insert Disc – Disc Menu (Blu-ray, Disc™/DVD) Pop-Up Menu (Blu-ray Disc™) Operating modes Menu Picture Mode...
Remote Control Assist – BluTechVision 3D Operation Audio off / on (Loewe TV set) Switch on/off in standby mode ......(Page 13) LED display for current operating mode Device set, e.g. Operate AudioVision Switch over to operate TV AudioVision short: CD/DVD/USB/iPod; long: FM-Radio Device set, e.g.
Front / Rear View Playback / Screen Resolution Open / Close Disc Drawer CD/DVD/Blu-ray Switching Off in Standby Display Pause Stop Drive USB socket Front side Operating Front Á ap Next chapter display (opened) IR Receiver Previous chapter DIGITAL AUDIO OUT COAXIAL VIDEO OUT (digital sound output) (analogue video output)
Use with other Loewe system components LAN (network connection) Connection of Loewe flat TV sets via Digital Link HD (HDMI CEC) (from mainframe L271x - if necessary, a software update of the TV set must be carried out) and Blu-ray™/CD/DVD-Player operation only with one Assist remote control - also with the concealed setup of Playback of Blu-ray™...
Welcome Thank you Setup for choosing a Loewe product. We are happy to welcome you as our customer. • Place the device on a stable, level surface. At Loewe, we combine the highest standards of technology, design and user- • Do not set up the unit near strong heat sources or in direct sunlight.
Always switch off your system (BluTechVision 3D, TV set and any other components About these operating instructions which may be connected) before connecting or disconnecting other devices or speakers.
220-240V 50/60 Hz mains socket. ➠ It is possible that your Loewe TV set may need a software update. Please contact your specialist retailer. Loewe Flat TV set (from SL L271x)
Connecting Cabling BluTechVision 3D (other TV-/audio In order to play the audio from the BluTechVision 3D using your TV set (without HDMI) or your audio equipment, you need to make an audio connection between devices) the audio equipment and the BluTechVision 3D. It is preferable to use an op-...
¾¾ From mainframe L271x, Software V9.16 Other Devices Operating Loewe Equipment You can operate various Loewe devices using the Assist Remote Control. The device buttons REC - DVD - AUDIO can be set up for this. Using the remote control for a Loewe TV set Press the required device buttons and the Stop button Press TV button;...
Switching on/off set to compatible additional devices, such as BluTechVision 3D. Digital Link HD makes sense if you want to set up BluTechVision 3D in a concealed location and Set the remote control for BluTechVision 3D operation by all the devices are to be controlled via the Loewe TV set.
Call up the Setup menu. Home Menu Select desired category. The Home Menu of the BluTechVision 3D is shown on the screen of the TV set Select the desired sub-category. connected to it. Here you can select the desired functions.
Language Menu Your BluTechVision 3D attempts to set the menu language automatically over the HDMI-CEC connection to the same language as that of the Loewe TV set. You can also set the desired menu language manually. Call up the Setup menu.
Menu Display Resolution You can set the resolution of the video signal at the socket HDMI OUT and In the menu DISPLAY you can set the screen view of your BluTechVision 3D on COMPONENT VIDEO OUT. your TV set. Select Resolution option.
PCM Stereo Select this option if a unit with a twin channel stereo with the coding Dolby Digital or Dolby Digital Plus amplifier is connected to the BluTechVision 3D with reduced dynamics PCM Multi-Ch Select this option if a unit with a digital multi-channel...
Start-up Menu Lock In the LOCK menu you can set playback limitations. Call the Setup menu. Select the LOCK option. Setting up a Password Please set your personal password. Select option Password. Select option New. Enter a four digit password using numeric keypad. Confirmation of the new password.
Start-up DVD- Rating Area Code This function limits play of DVDs that have an adult rating, providing the discs To use playback limitations of the discs, enter the Area Code of the respective have a corresponding code. For full play you are asked to enter the password. country (list see page 38).
If a dynamic IP Address has been allocated, a corresponding message appears. Your BluTechVision 3D can be connected to a home network (LAN) with internet connection via the LAN connection on the back (page 10). This allows you to use the BD-LIVE™ service which provides you with optional information from the manufacturer of the Blu-Ray disc.
Page 21
Setting Open Connection Settings menu Confirm OK. BD-LIVE™Connection You can find out whether your BluTechVision 3D is allowed to create an internet Your BluTechVision 3D now tries to create a connection to connection to the BD-LIVE™ service (page 30). the internet router in your home network using the set Call the Setup menu.
Start-up Menu Others Saving energy To be able to save energy, the device should be set in such a way that after some time without playing, it automatically switches itself off. Blu-ray Disc Storage Select Call up the Setup menu. You can choose whether to integrate in the unit or or to use an external memory for the BD-LIVE-Function, connected to the USB plug socket.
Confirm OK. http://support.loewe.tv • If you still do not have independent access to the Loewe Support Portal, set it The software found on the USB stick is checked and the message is displayed. If the software is newer than that installed on the up now.
Audio CD Audio Inserting Discs (CD-DA) The disc drawer of your BluTechVision 3D is located behind the front flap (page 6). Press the button on the device to open the disc drawer Place the disc * only À nalised discs in this drawer.
Playback of Discs Playback in General Search BD DVD-V DivX CD Your BluTechVision 3D tries to read the disc. The Display Select the search direction and speed: shows READ. Keep pressed: Rewind. Repeated pressing increases the reverse Depending on the medium, playback starts automatically or a playback speed.
Playback of Discs Disc Playback Selecting a Title CD DivX MP3 JPEG You can display various information about the inserted disc on the screen and set P+ during playback, to select the next title/ next photo or P- to options for playing. return to the beginning of the current title.
Page 27
Playback of Discs Subtitles Markers BD DVD-V DivX BD DVD-V DivX You can start the playback from a saved marker. A maximum of nine markers can be saved. Call up the title menu. ➠ The marks remain in the memory only during playback of the current Select Subtitle medium.
Last Scene Memory BD DVD-V Your BluTechVision 3D notes the last scene of the last disc (Blu-ray disc™, video DVD) played back. The position of the last scene is saved in the memory even if the Yellow Button zoom out disc is removed from the device or the device is switched off (or set to standby).
Playback of Discs Disc Menu Picture Mode You can carry out various different settings for the screen representation during playback. Some discs contain menus to set the language for the film soundtrack, for exam- Call up Picture Mode menu. ple, or for subtitles, or to select certain scenes. Accompanying film material may also be available.
Set up the access to your home network as described from page 20 onwards. ➠ Activate the option that your BluTechVision 3D can create an online connection to the BD-LIVE™ service (page 21). ➠ Make sure there is adequate storage space for the BD-LIVE™...
Playback of Media Files With your BluTechVision 3D, you can playback digital media files which are saved Video Files on discs or on USB sticks. Home Menu Playback of Video Files Call Home Menu. Call Home Menu. Select the Option Movie in the Home Menu.
Playback of Media Files DivX Subtitle USB Operation Select the Subtitles as described on page 26. • You can connect a USB storage medium directly to the USB port. Green Button Select code table for DivX Subtitle by pushing • Only at the front USB socket (page 6), a USB hard disc can also be connected. several times.
Playback of Media Files Music Files Conditions for Music Files • Sampling frequency between 11 - 48 kHz (MP3), between 8 - 48 kHz (WMA). • Bit-rate: between 8 and 320kbps (MP3 and WMA). Playback of Music Files • The maximum number of files and folders is 2000. The search can take Call up Home Menu.
Playback of Media Files Selecting/setting options. Photo Files Uppermost line Select photo with Playback of Photo Files Slide show Slide show Pause/Play with OK Call up Home Menu. Music Select Select music or slide show Select the option Photo. Music Music Pause/Play with OK Confirm OK.
Environment Environmental Protection HDMI Format Setup You can set the video resolution of your BluTechVision 3D when using the HDMI Cardboard box and packaging OUT socket to adjust the picture quality optimally to your TV set. In line with national regulations regarding the disposal of packaging materials, ➠...
The unit is not working properly. Unplug the mains plug from the mains socket and then try plugging it in again after 30 seconds. The software of your Loewe TV set is not Contact your specialist retailer. compatible wiht BluTechVision 3D.
TV standards. The new Loewe TV sets automatically playback 24p films in the original 24p format. Interlaced Mode: Technology for picture creation in line jump process for flicker- Blu-ray Disc™: (BD) disc format for recording/playing back high definition video...
Language code list Area Code List Enter the appropriate code for the initial setting of “Disc Audio”, “Disc Subtitles” Enter the appropriate code for the initial setting of the “Area Code” (Page 19). and/or “Disc Menu“. (Page 15). Maori 7773 Afghanistan Republic of Congo Afar...
Technical specifications General Company and editorial details BluTechVision 3D Item No. 51501 L/T Loewe Opta GmbH is a public limited company under German law with its Head Operating temperature 5 °C ... 35 °C Office in Kronach. Humidity 30 % ... 85 % (no condensation) Industriestrasse 11, 96317 Kronach Dimensions (approx.)
Need help?
Do you have a question about the BluTechVision 3D and is the answer not in the manual?
Questions and answers