NEC NP-V311W User Manual page 72

Options
AUTO
4:3
16:9
15:9
16:10
WIDE ZOOM
(V311X)
LETTER BOX
(V311W/V281W)
NATIVE
Sample image when the appropriate aspect ratio is automatically determined
V311X
[Computer signal]
Aspect ratio of incoming signal
Sample image when the appro-
priate aspect ratio is automati-
cally determined
[Video signal]
Aspect ratio of incoming signal
Sample image when the as-
pect ratio is automatically de-
termined
The projector will automatically determine the incoming signal and display it in its aspect
ratio. (→ next page)
The projector may erroneously determine the aspect ratio depending on its signal. If this
occurs, select the appropriate aspect ratio from the following.
The image is displayed in 4:3 aspect ratio.
The image is displayed in 16:9 aspect ratio.
The image is displayed in 15:9 aspect ratio.
The image is displayed in 16:10 aspect ratio.
The image is stretched left and right.
Parts of the displayed image are cropped at the left and right edges and therefore not
visible.
The image of a letterbox signal is stretched equally in the horizontal and vertical direc-
tions to fit the screen. Parts of the displayed image are cropped at the top and bottom
edges and therefore not visible.
The projector displays the current image in its true resolution when the incoming computer
signal has a lower resolution than the projector's native resolution.
[Example] When the incoming signal
with the resolution of 800 × 600 is
displayed on the V311X:
NOTE:
• When a non-computer signal is displayed, the [NATIVE] is not available.
• When you are displaying an RGB image with a higher resolution than the projector's native
resolution such as SXGA, the image will be displayed in the projector's native resolution (XGA)
even if [NATIVE] is selected.
4:3
4:3
Function
5:4 16:9
Letterbox
NOTE: To display a squeezed signal prop-
erly, select [16:9] or [WIDE ZOOM].
62
5. Using On-Screen Menu
15:9
Squeeze
16:10