Installing And Uninstalling The Battery; Charging The Battery; Using The Battery - Icemobile CENIOR User Manual

factory but it may still be able to power on your phone. Please
completely use up the power of the battery and then charge it for at
least 12 hours with your phone turned off. You battery will reach its
optimal state after three cycles of charge and discharge.
2.1.1.

Installing and uninstalling the battery

To install the battery, remove the back cover from the phone by
pressing firmly on the cover and slide it down. Align the golden
contacts of the battery to the contacts in the phone, and then gently
snap down the battery into place. Re-assemble the back cover.
To uninstall the battery, flip the battery out from the bottom of the
battery.
2.1.2.

Charging the battery

Plug the charger into the socket on the side of your phone. Connect
the charger to an AC wall socket. The blinking of the battery level
icon indicates the battery is being charged. When the blinking stops,
it indicates the charging is finished
During charging, the phone and charger will feel warm to the
touch. This is normal.
Warning:

The operating ambient temperature of the charger is
0°C-50°C. Do not use it when the temperature exceeds this
limit.

Use only chargers approved by the phone manufacturer to
ensure safety. Failing to comply with this will violate the
terms and conditions of the warranty.
2.1.3.

Using the battery

The waiting time and calling time capacities specified by the phone
manufacturer are obtained under the ideal operating environment.
10