Network Settings; Security Settings - Icemobile CENIOR User Manual

ringtone from T card.
 SIM2 incoming call: Set the ringtone for the
SIM2 incoming call. You can also select
ringtone from T card.
 Ringtone volume: Set the ringtone volume of
the incoming call.
 SIM1 message: Select the ringtone for the SIM1
message. You can also select the ringtone from
T card.
 SIM2 message: Select the ringtone for the SIM2
message. You can also select the ringtone from
T card.
 Message volume: Set the volume for message
ringtone.
 Keypad: Select the ringtone for keypad. Human
voice tone, Click, Tone
 Keytone volume: Set the volume for the
keypad.
 Power on: Select the ringtone for the power on.
 Power off: Select the ringtone for the power on.
 System alert: On /off the system alert.
 Reset: Reset the setting to the default.
After plugging in the headset, ringtone will output from the headset
as well as the phone, when there is incoming call or message.
8.6.

Network settings

You can set up the phone network with this function.
SIM1/SIM2 network settings
 Network selection: choice the modes of searching the
phone network, including Auto and Manual modes.
8.7.

Security settings

You can manage your phone safely with this function.
The phone lock password, SIM card password and PIN2 support
4-8digit numbers, do not support other characters. The original
password of the phone when leaving the factory is 1122. The
password and PIN2 and SIM card are provided by the network
25