Emerson ELC320EM9 Owner's Manual page 29

C. New Password C. New Password
Although the default code "0000" is supplied with the unit, you can set
your own password.
5
Use [Cursor K / L] to select "New Password", then press
[ENTER].
or
6
Use [the Number buttons] to enter the new 4-digit
password.
• Enter password again in "Confirm password. " entry
field.
7
Press [SETUP] to exit.
Note:
• Make sure new password and confirm password must be
exactly the same. If they are different, the space is cleared
for reentering.
• Your password will be erased and return to the default
(0000) when a power failure occurs.
If you forget the password, unplug the AC power cord for
10 seconds to restore the password to 0000.
V-chip V-chip
MPAA Rating
TV Rating
Canadian English Rating
Canadian French Rating
Downloadable Rating
Clear Downloadable Rating
New Password
V-chip
V-chip
- - - -
Enter password.
- - - -
Confirm password.
BACK
PIN Code Back
29
EN