Table of Contents
Advertisement
Inserting
the Batteries
The camera takes four AA alkaline, lithium, or rechargeable Ni-MH batteries. A set of four alkaline bat-
teries is supplied with the camera. Insert the batteries in the camera as described below.
Open the battery-chamber
cover.
Slide the battery<ham-
ber latch in the direction
shown
and open the
battery-chamber
cover.
Be sure tile camera is off before opening tile bat-
tery-chamber cover.
_d
• Do not open the battery-chamber cover when
the camera is on. Failureto observe tills pre-
caution could result in damage to image files or
memory cards.
• Do not use excessive force when handling the
battery-chamber cover.
2
Insert the batteries.
Insert the batteries in the
orientation
shown by the
"+" and "-" marks inside
the battery chamber.
_d
• Insert the batteries in the correct orientation.
• Neverusebetteries withped-
B_eryc_sing
ing or damaged casingor mix
old andnewbatteries, b atter-
ieswithdifferent c harge/eve/s,
or batteries ofdifferenttypes.
Failure to observe these
precautions could
result
in the batteries leaking or
overheating.
• NeverusemanganeseorNi-Cdbatteries.
•The capacity of alkaline batteries varies with the
manufacturer and drops at temperatures below
10°C/50°F; Ni-MH batteries are recommended.
• Fingerprints and other soil on the battery termi-
nalscarl shorten battery life.
Advertisement
Table of Contents
