Additional Information - Dell PowerVault NX3300 Network Attached Storage System Setting Up

Setting Up Your Dell PowerVault NX3300 Network Attached Storage System (continued)
|
4 Initial Confi guration
Launching the Remote Desktop
NOTE: Ensure that you have completed the Initial Confi guration steps before connecting to the NAS system using Remote Desktop.
• Enable Remote Desktop using Server Manager or system properties (Control Panel -> System).
• If Dynamic Host Configuration Protocol (DHCP) and Domain Name System (DNS) are implemented on your network, your system automatically configures the
network settings. You can launch Remote Desktop from a client and remotely access the NAS system using the default system name.
D<ServiceTag>
For example: In the Remote Desktop Connection window, type
on the system.
Locating Your System's Service Tag
To locate the Service Tag of your system, see the section
NOTE: The default password is Stor@ge!
© 2013 Dell Inc. All rights reserved.
Trademarks used in this text: Dell™, the DELL logo, and PowerVault™ are trademarks of Dell Inc.
0V5DGWA00
2013 - 02
1. When you start your NAS system running Windows Stor-
age Server 2012 for the fi rst time, press OK on the Default
Password screen.
NOTE: Before changing the password, ensure that you
change the system language according to your prefer-
ence.
2. To change the default language, navigate to
C:\Dell_OEM\MUI, and run the appropriate language batch
fi le. Follow the on-screen prompts to install your
preferred language.
3. To change your administrator password, press
<Ctrl><Alt><Del> and click Change a Password.
Server Manager starts automatically when you log on the fi rst
time.
In Server Manager, click Confi gure this local server to:
• Change the computer name
• Specify the domain
• Check for latest Windows updates
• Specify the time zone
• Configure Remote Desktop
NOTE: Click on the left bottom corner of the screen
to locate the Start screen to navigate to a particular
application.
, where < ServiceTag > is the Service Tag number located
in this document.
|
5

Additional Information

Dell OpenManage Server Administration
You can monitor your system remotely using Dell OpenManage Server Administrator. To access Server Administrator, connect to the secure port,
1311, of your NAS system. For example, type: https://D<ServiceTag>:1311
<ServiceTag> is a unique fi ve- to seven-digit alphanumeric code. To locate the Service Tag of your system, see the section
Where
System's Service Tag in this document.
Documentation
For more information, see the following documentation at dell.com/support/manuals.
Title Description
Getting Started Guide Provides an overview of system features, setting up your system, and technical specifi cations. This docu-
ment is also shipped with your system.
Owner's Manual Provides information about system features and describes how to troubleshoot the system and install or
replace system components.
Rack Installation Instructions Describes how to install your system into a rack. This document is also shipped with your rack solution.
Administrator's Guide Provides information about confi guring and managing the system.
Troubleshooting Guide Provides information about troubleshooting the software and the system.
Dell OpenManage Server Adminis- Provides information about using the OpenManage Server Administrator to manage your PowerVault NAS
trator User's Guide system.
NOTE: For any documentation related to Dell OpenManage Server Administrator, see dell.com/openmanagemanuals.
Documentation Feedback
If you have any feedback for this document, write to documentation_feedback@dell.com. Alternatively, you can use the Feedback link at the top
left corner of your documentation web page.
Locating Your