Bluetooth & Mat - DICE MediaBridge MB-1500 Installation Manual

Bluetooth & MAT (Music Announcer Technology) configuration
To alter voice announcement and Bluetooth pairing settings select Bluetooth as your audio source, press the preset button
that corresponds to the feature you want to configure, and then use track or channel UP/DOWN to browse through configura-
tion options:
• PRESET 1, 2 or 3 should be selected if you want to control Bluetooth audio streaming playback.
• PRESET 4 controls the Autoconnect feature. Available options are Enable and Disable. This controls whether or not the
MediaBridge will reconnect automatically when phone becomes disconnected. Only the most recently paired device will
be reconnected automatically.
• PRESET 5 controls the paired devices memory. There is only one option. Tune or change tracks to clear the listing of
paired devices with the MediaBridge and put module into discoverable mode.
• PRESET 6 controls MAT setting. Available options are Default, Extended, Phone only, and Off (refer to the chart below).
Options Function
Default Reset MAT back to factory default configuration
Extended Turn on ALL MAT feature
Phone only Turn on the phone relative MAT only
Off Turn off MAT completely
25