Table of Contents
Advertisement
User Operation Description
Remote Control Key Function Description
Operations by the keys on the Remote Controller
1 POWER
This key turns the set from the standby mode
into On mode.
2 1-9 digits
Press to select TV programs number directly,
program number will be displayed on the
screen for 3 seconds.
For programs 01~99, to get the expecting program
quickly, it can be accessed by pressing 2 digital
keys in sequence. Say if you want to access
program 23 , press key 2 first, and within 2
seconds, press key 3. If key 3 is not pressed
within 2 seconds, the program accessed is
program number 2.
3 TV
Press the button will view the TV picture.
4 I/II
Press to force Mono to Stereo or Stereo to
Mono for NICAM / A2 stereo signal, and toggles
between Dual I and II if NICAM / A2 Dual Sound
is available. More detailed information is listed
below.
4.1 FOR NICAM STEREO SOUND SIGNAL.
When NICAM stereo sound signal is received,
it will be decoded by TV system automatically,
and the yellow OSD "
NICAM stereo signal for current sound status.
If press key "I/II" once, the sound will be forced
to mono mode with yellow OSD "
Press key "I/II" once more, the sound mode will
be back to NICAM stereo with yellow OSD "
4.2 FOR NICAM DUAL SOUND SIGNAL
When NICAM dual sound signal is received,
it will be decoded by TV system automatically,
and the yellow OSD " I "indicates decoding
NICAM dual channel 1 sound signal for current
status. If press key "I/II" once, the
sound
sound will be forced to NICAM dual channel
2 mode with yellow
OSD " II" displayed .
Press key "I/II" for the third time, the sound
will be forced to MONO
OSD "
" displayed. Press key "I/II" for the
fourth time, the sound mode will be
NICAM dual channel 1 with yellow OSD " I " displayed.
4.3 FOR NICAM MONO SOUND SIGNAL
When NICAM mono sound signal is received, it will be decoded by TV system automatically, and
the yellow OSD "
indicates decoding NICAM mono signal for current sound status. If press key
"I/II" once, the sound will be forced to mono mode with yellow OSD "
indicates decoding
" displayed.
mode with yellow
back to
1
2
3
4
5
6
7
8
9
10
11
" displayed.
12
NOT USED
13
" displayed.
3
POWER
RC-5R-1
I/II
OK
TXT TIME/SUB
SLEEP
14
15
16
17
18
NOT USED
19
20
21
22
NOT USED
Advertisement
Table of Contents
