Hints For Timer Recording - Sylvania DVC860D Owner's Manual

2) Set the frequency of the recording
For once: Press K or L to point to
"ONCE".
For daily (Monday~Friday): Press K
or L to point to "DAILY".
For weekly: Press K or L to point
to "WEEKLY".
Then, press B.
3) Set the date
First, press K or L for the month.
Then, press B. Next, press K or
L for the day. Then, press B.
4) Set the start time
First, press K or L for the hour.
Then, press B. Next, press K or L
for the minute. Then, press B. And
then, press K or L for AM or PM. Then, press B.
5) Set the end time
Follow the instructions of
"Set the start time" to set
the end time.
6) Set the channel number
Press K or L repeatedly for the
desired channel number. Then,
press B.
If you connected the DVD/VCR COMBINATION UNIT to
a cable box or satellite box as in "DVD/VCR TO TV
CONNECTION" on page 13, select the DVD/VCR to channel 3
or 4 the same channel as RF output channel of the DVD/VCR.
Then, select the channel you want to record with the cable box
or satellite box.
Leave the cable box or satellite box on for timer recording.
7) Set the tape speed
Press K or L repeatedly for the
desired tape speed. Then, press B.
5
To set another program, repeat step [4]. To
exit, press CLEAR/C.RESET.
6
Press T-SET to set the timer.
¡ The TIMER REC light on the DVD/VCR COMBI-
NATION UNIT comes on. TIMER RECORDING
WILL NOT BE ACTIVATED UNLESS YOU
PRESS T-SET.
HINTS FOR TIMER
RECORDING
¡ If there is a power failure or the VCR is unplugged
for more than 30 seconds, the clock setting and all
timer settings will be lost.
¡
If a tape ends during TIMER RECORDING, the
VCR will stop, eject the tape, and switch to the DVD
mode automatically as the TIMER REC light blinks.
(If the DVD power is off, the VCR will become
PROGRAM NUMBER 4
ONCE STANDBY status).
DAILY
¡
WEEKLY If a tape is not in the VCR or does not have a safety tab,
the TIMER REC light flashes and timer recording will
not operate. Please insert a recordable tape.
¡
When all timer recordings are finished, the TIMER
REC light will flash. To use the VCR again as usual,
ONE TIME PROGRAM
PROGRAM NUMBER 4
press T-SET to disable the flashing TIMER REC light,
DATE - - / - -
START TIME - - : - - - -
then press VCR/TV to select the VCR position. Select
END TIME - - : - - - -
CHANNEL - -
either VCR or DVD mode, then continue with the
REC SPEED - -
other features as described in this manual.
¡ When timer recordings are set, the TIMER REC light
will come on. To use the VCR as usual until the time for
ONE TIME PROGRAM
PROGRAM NUMBER 4
the recording, press T-SET so that TIMER REC light
DATE 05 /12 MON
START TIME - - : - - - -
disappears. Press VCR/TV to choose the VCR position.
END TIME - - : - - - -
CHANNEL - -
Select either VCR or DVD mode, then continue with
REC SPEED - -
the other features as described in this manual.
If you want to use the DVD player during
a VCR timer recording or while the
ONE TIME PROGRAM
TIMER REC light is on or flashes.
PROGRAM NUMBER 4
DATE 05 /12 MON
¡ You can use the DVD player while the TIMER REC
START TIME 07: 30 PM
END TIME - - : - - - -
CHANNEL - - light is on or flashes, or during a timer recording.
REC SPEED - -
Press POWER to turn on the DVD. Press DVD on the
remote control to choose DVD mode, then continue
with the other DVD features as described in this man-
ONE TIME PROGRAM
PROGRAM NUMBER 4
ual. You don't have to set the TIMER off to use the
DATE 05 /12 MON
START TIME 07: 30 PM
DVD only.
END TIME 08: 30 PM
CHANNEL - -
REC SPEED - -
TO STOP AN AUTOMATIC TIMER PRO-
GRAM ALREADY STARTED
Press STOP/EJECT on the DVD /VCR COMBINA-
TION UNIT.
TO CHECK, CORRECT, OR CANCEL AN
AUTOMATIC TIMER PROGRAM
1
ONE TIME PROGRAM
PROGRAM NUMBER 4
¡ If the DVD output mode is selected, you have to
DATE 05 /12 MON
START TIME 07: 30 PM
switch it to the VCR mode by pressing the VCR on
END TIME 08: 30 PM
CHANNEL 16
the remote control or the OUTPUT on the VCR.
REC SPEED SP
SP
SLP
2
3
4
¡ The details of the selected program appears on the
TV screen.
¡
Go to the digit you want to change by pressing B or
s. Then, enter correct numbers by pressing o or p.
¡
You may cancel the entire program by pressing s
while the program number flashes.
VCR
5
6
– 20 –
Press T-SET.
Select main menu by pressing MENU.
Select "TIMER PROGRAMMING" by press-
ing K or L. Then, press B.
Select the program number you want to
check by pressing K or L.
Press CLEAR/C.RESET to exit.
Press T-SET to return to timer stand-by mode.
EN
1L25