Removing The Processor Thermal-Cooling Assembly; Replacing The Processor Thermal-Cooling Assembly - Dell Vostro 1500 Service Manual

Back to Contents Page
Processor Thermal-Cooling Assembly
Dell™ Vostro™ 1500 and Inspiron™ 1520/1521 Service Manual
Removing the Processor Thermal-Cooling Assembly
Replacing the Processor Thermal-Cooling Assembly
Removing the Processor Thermal-Cooling Assembly
CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide.
1. Follow the instructions in Before You
2. Remove the optical drive (see
3. Remove the hard drive (see
4. Remove the hinge cover (see
5. Remove the keyboard (see
6. Remove the display assembly (see
7. Remove the internal card with Bluetooth wireless technology, if installed (see
8. Remove the palm rest (see
9. In sequential order, loosen the four captive screws that secure the processor thermal-cooling assembly to the system board, then carefully lift the
processor thermal-cooling assembly out of the computer.
1 processor thermal-cooling assembly 2 captive screws (4)
Replacing the Processor Thermal-Cooling Assembly
CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide.
1. Align the four captive screws on the processor thermal-cooling assembly with the screw holes on the system board.
2. In sequential order, tighten the four captive screws to secure the processor thermal-cooling assembly to the system board.
3. Replace the palm rest (see
4. Replace the internal card with Bluetooth wireless technology, if applicable (see
Begin.
Removing the Optical Drive).
Removing the Hard Drive).
Removing the Hinge Cover).
Removing the Keyboard).
Removing the Display Assembly).
Removing the Palm Rest).
Replacing the Palm Rest).
Removing the Bluetooth Card).
Replacing the Bluetooth Card).