Removing The Display Assembly - Dell 500 Service Manual

Back to Contents Page
Display
Dell™ 500 Service Manual
Display Assembly
Display Bezel
Display Panel
Display Assembly

Removing the Display Assembly

CAUTION: Before you begin the following procedure, follow the safety instructions in the Product
Information Guide.
1. Follow the instructions in
2. Loosen the eight captive screws on the bottom cover and remove it.
3. Disconnect the antenna cables from the Mini-Card.
4. Lift the antenna cables from the securing tabs and release them from the routing channel.
1 securing tabs
5. Remove the two screws securing the display assembly from the bottom of the computer.
Before You Begin.
2 antenna cables