Cuisinart SS-300 Instruction Booklet page 15

• Once the vinegar is dispensed,
discard it into sink.
Step 2: Second Vinegar rinse
• Pour the remaining 10 ounces of vinegar
into the water reservoir.
• Place the ceramic mug on the drip tray.
• Lift the brewer handle, but do not add
a K-Cup .
®
• After all the vinegar has drained, lower
the brewer handle and press the Hot
Water button.
• The Hot Water button will illuminate blue,
indicating the brewer is heating.
• Power the brewer off as it starts to
dispense.
• Allow brewer to sit for 30 minutes.
• Power on the brewer, lift and lower
brewer handle, then press the Brew
button.
• Once the vinegar is dispensed, discard
hot contents into sink.
Step 3: fresh Water rinse
• Repeat step 1 three times using
freshwater in place of vinegar.
• This will clean the brewer plumbing and
remove any residual vinegar taste. The
brewer is now ready for normal use.
15