Indicators; Leds - Western Digital WDBWVL0080KBK Maintenance Manual

Indicators

Component Icon
Ethernet ports
DC In connector
Recovery button
RECOVERY
USB ports
VGA port
Kensington
security slot

LEDs

The LEDs on the WD Sentinel identify the status of the unit.
LED Color
Power LED Black
Blue
Red
Drive LEDs Black
Blue
Red
Ethernet Black
Port
Green
Amber
WD SENTINEL DS5100/DS6100
ADMINISTRATOR AND MAINTENANCE GUIDE
Description
Connect the device to a local network.
Connects the device to a DC power cord and the power outlet.
Button on the back of the server recovers the server (including the operating
system) while using a USB drive in an event of an OS corruption.
Connects with USB 2.0 and 3.0 devices such as a USB storage, USB mouse,
USB keyboard, or a UPS.
Connects to your VGA monitor
For drive security, the device is equipped with a security slot that supports a
standard Kensington security cable. Visit
more information.
State Description
Off WD Sentinel server is currently inactive.
Solid WD Sentinel server has successfully booted the
software and is operational.
Flashing Indicates that a serious fault has occurred and
needs immediate attention.
Off If the LED is off while other drive LEDs are on, no
drive is installed in the bay.
Flashing Drive is currently active. Note that all lights in a RAID
system are active at the same time by design.
Solid Indicates drive failure. Replace this drive as soon as
possible. The system is no longer RAID protected
until the drive is replaced and the RAID structure is
repaired.
Off Indicates an inactive state.
Flashing Indicates link activity.
Solid Indicates that there is a link connection
PRODUCT OVERVIEW
http://www.kensington.com/ for
12