I/R Device; Figure 4-29. I/R Device Removal - Dell Latitude LM Service Manual

4-36 Dell Latitude LM Systems Service Manual

I/R Device

top
assembly
I/R connector

Figure 4-29. I/R Device Removal

To remove the infrared (I/R) device, follow these steps:
1. Remove the top assembly.
See "Top Assembly" found earlier in this section.
2. Disconnect the I/R device connector from the status display board.
3. Dislodge the I/R device from the recess on the top assembly.
Thread the I/R connector and wires through the opening on the top
assembly.
4. Remove the I/R device from the top assembly.
recess
I/R lens