The Pocket Pc Does Not Respond Any More; The Battery Discharges Too Quickly; The End Button Does Not Respond Properly - Fujitsu Siemens Computers Loox T Easy Manual

The Pocket PC does not respond any more

Cause
An application program has caused
the fault.
The battery is dead.

The battery discharges too quickly

Cause
The battery is either too hot or too
cold.

The End button does not respond properly

Cause
You have pressed the End key for too
long to switch the Pocket PC on or
off.
A26391-K182-Z120-1-7619, edition 1
Troubleshooting
► Restart the Pocket PC (see "Switching the
Pocket PC on and off").
or
► If the restart does not work, reset the Pocket PC to
the factory settings (see "Cold starting and resetting
factory default settings").
► Connect the power adapter to the Pocket PC to
charge the battery.
or
► Connect the power adapter to the cradle and insert
the Pocket PC in the cradle to charge the battery.
The battery is charging. The power-on indicator flashes
orange.
Troubleshooting
► Bring the Pocket PC up / down to a normal
temperature again.
If the operating time of the battery mode is extremely
short, the battery is probably old and should be replaced.
Please contact your dealer for a new battery.
Troubleshooting
► Briefly press the End key until the Pocket PC
switches on or off.
Troubleshooting and tips
91