Lcd Panel; Figure 11. Lcd Panel Removal - Dell Latitude L400 Service Manual

To replace the display-assembly latch, perform the following steps:
1. Carefully place the latch spring over the post on the display-assembly top
2. Holding the latch, stretch the spring slightly and set the display-assembly
3. Reinstall the bezel.

LCD Panel

ZIF
connector

Figure 11. LCD Panel Removal

NOTICE: To avoid damaging the system board, you must remove the
main battery before you service the computer.
1. Ground yourself by touching the unpainted metal surface of the I/O panel
support.dell.com
cover.
You may need to use a small flat-blade screwdriver to place the spring over
the post. Hold the spring on the post with the screwdriver while
performing the next step.
latch in place in the display assembly top cover.
LCD panel
back light
plug
M2 x 3.5-mm screws (4)
narrow flex
cable
M2 x 3.5-mm
screw
EMI shield
inverter
on the back of the computer.
inverter
narrow flex
back light
cable
plug
Dell Latitude L400 Service Manual
wide flex
cable
EMI
sponges (2)
LCD flex
cable
13