Dell Latitude C810 Service Manual page 51

Removing and Replacing Parts : Dell Latitude C810 Service Manual
1. Follow the instructions in
2. Remove the system board.
3. Remove the three 4-mm screws from the fan assembly.
4. Disconnect the two fan cables from the system board.
5. Pull the fan assembly away from the back-panel bracket.
NOTICE: When reconnecting the fan cables, connect the shorter cable to the connector closest
to the fan assembly. Route both cables so that they will not be pinched by the thermal cooling
assembly.
RJ-11/RJ-45 Board
NOTICE: Disconnect the computer and attached devices from electrical outlets and remove any
installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by periodically
touching unpainted metal on the computer.
RJ-11 and RJ-45 Connector Covers
file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/L...Latitude/C810/C810_SERVICE_MANUAL/2e40520.htm (43 of 46)6/21/2004 1:32:50 AM
"Preparing to Work Inside the Computer."