Dell Inspiron 8100 Service Manual page 91

Removing and Replacing Parts : Dell Inspiron 8100
4. Starting on the left side, use a magnetic screwdriver to reinstall the six M2 x 3-mm screws that
secure the display panel in the top cover.
5. Reinstall the display assembly bezel.
Display Latch Assembly
1. Remove the hinge
2. Remove the screw securing the flex cable to its strain relief, and then use the pull loop to
remove the flex cable from the video card.
NOTICE: When reconnecting the flex cable, press down on both ends of the connector, not in
the middle. Pressing the middle of the connector can damage fragile components.
file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA...20ok/Inspiron/8100/8100_SERVICE_MAN/remove.htm (26 of 52)6/21/2004 1:09:07 AM
cover.