Dell Inspiron 8000 Service Manual page 65

Removing and Replacing Parts : Dell Inspiron 8100
Mini PCI Card Assembly
NOTICE: Disconnect the computer and attached devices from electrical outlets and remove any
installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by periodically
touching an unpainted metal surface on the computer.
You must remove the optional Mini PCI card assembly before the system board assembly can be
removed. A Mini PCI card assembly may consist of a modem, a network adapter, a modem and
network adapter combination, or a wireless network adapter. A modem, network adapter, or modem
and network adapter combination must be connected to the wiring harness as appropriate; a wireless
network adapter must be connected to the system's internal antenna.
Removing the Mini PCI Card Assembly
1. Follow the instructions in
2. Remove the M2.5 x 20-mm screw and lift out the Mini PCI card cover.
file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA...20ok/Inspiron/8000/8000_SERVICE_MAN/remove.htm (12 of 52)6/21/2004 1:07:32 AM
"Preparing to Work Inside the Computer."