Buffalo Wireless-G High Speed ADSL2+ Modem Router Manual page 14

Manually Configuring Client Adapters in Windows 98SE or Me
1. Right-click on "My Network Neighborhood" and select "Properties" from the
drop-down menu.
2. Select "TCP/IP -> settings" for your installed network adapter.
3. If not already selected, select "Obtain an IP address automatically" on the IP
address tab. Click "OK".
4. You will also need to delete the Gateway address from the Gateway tab and
DNS Configuration entries in order to properly be configured for connection
to the Buffalo router.
Restart the computer. When the computer restarts, your network adapter(s)
are now configured for use with the Router.
Recommended Web Browser Settings
In most cases, you will not need to make any changes to your web browser's
settings. If you are having trouble accessing the Internet or the advanced
web-based user interface, then change your browser's settings to the
recommended settings in this section.
Internet Explorer 4.0 or Higher
1. Start your web browser. Select "Tools" , "Internet Options" and the
"Connections" tab.
2. In the "Connections" tab, there are three selections: "Never dial a
connection", "Dial whenever a network connection is not present", and
"Always dial my default connection". If you can make a selection, select "Never
dial a connection". If you cannot make a selection, go to the next step.
12